JBSystems LED MANAGER
max. 2x 150W LED
*Extremely versatile power supply for all kinds of passive RGB LED-projectors.
*Different standalone working modes:
*Hold mode: Instant access to 9 pre-programmed colors
*Static chase mode: 12 different color chases with manual speed control
*Sound chase mode: 12 different color chases with audio triggering
*Spectrum mix: 32 different spectrum mix colors, including nice color fades
*Adjustable speed and dimming with faders
*Slow color fades with adjustable fade time
*Blackout and 'Full on' function
*All functions can be controlled directly on the on the LED-Manager or by the optional LEDCON-01 remote.
*Several LED-Managers can be used in *Master/slave mode to create high power, fully synchronized setups.
*300Watt power: 2x 150W 24Vdc outputs.
*(R+G+B) with short-circuit protections
*Built-in Clock with battery backup and NiMH battery charger (batteries not included)
*3 independent programmable on/off timers. (start/stop 3 different color chases at 3 different times!)
*Can be controlled by any standard DMX controller!
*4 DMX channels needed: Ch1=red, Ch2=green, Ch3=Blue, Ch4=Dimmer/strobe.
*Enclosure prepared for easy installing against the wall.
*Fan cooling for extra reliability.
*Power Input: AC 230V~ 50Hz
*Fuse: 6,3A slow blow (20mm glass)
*Backup batteries: 3x 1,2V AA-type NiMH rechargeable batteries (optional)
*Output voltage to LEDs: DC 24V common anode *Output power to LEDs: 2x 150W max. (Total = 300W max.)
*Red: 2x 50W max. (Total = 100W max.)
*Green: 2x 50W max. (Total = 100W max.)
*Blue: 2x 50W max. (Total = 100W max.)
*DMX connections: 3pin XLR (DMX-512 standard) *DMX channels: 4 (CH1: red, CH2: green, CH3:blue, CH4:dimmer/strobe)
*Audio input: None, internal microphone
*Size: 330 x 202 x 106cm