Täydellinen "all-in-one" ratkaisu suojaamaan DMX-asennuksesi: MERGER+SPLITTER+BOOSTER
*The perfect all-in-one solution to secure your DMX-installations: MERGER + SPLITTER + BOOSTER
*100% electrical isolation between all in/outputs!
*2 DMX-inputs + 6 DMX-outputs, each equipped with 3pin and 5pin XLR-connectors.
*The booster function analyses the incoming DMX-signal and builds it back up from scratch to make it perfect for further use.
*The merger function combines 2 DMX-signals in different ways:
*HTP: the highest value of 2 identical channels from 2 DMX-signals will have priority.
*Backup: when the DMX-signal on input A fails, the DMX-signal in input B takes over immediately.
*Merger: DMX-signals from 2 different controllers can be combined and send over 1 cable, you can *choose the start address of the second controller.
*The splitter function distributes the DMX-signal(s) from the input(s) over 6 identical outputs that are 100% isolated from each other: problems that occur on 1 output will not influence the other outputs!
*The timing of the DMX-outputs can be adapted from 23ms to 45ms, increasing compatibility while connecting “slow" DMX-devices to “fast" DMX-controllers.
*Output behavior can be selected when suddenly both DMX-inputs fail:
*Null: no DMX signal on the outputs
*Hold: keep the last DMX values on the outputs.
*Clear: set the DMX values on all outputs to zero.
*Easy setup via 4digit LED display
*Power Input: 230Vac / 50Hz.
*DMX in/outputs: 3pin + 5pin XLR
*DMX refresh rate: 23ms (44Hz) to 45ms (22Hz)
*Size: 482 x 44 x 150mm (19"/1U)